Homeowners want to know what to do when a ruptured pipe plagues their home. This problem rarely occurs, but knowing what to do if a pipe breaks somewhere in your home is important. Homeowners who are unaware of this problem often face water damage to floors, walls, and valuables.

But many Comfort Air knows how to help struggling homeowners with a broken line. Our plumber has detailed the reasons, indicators, and how to respond. It’s easier than you think! By following these tips, you will reduce the water damage your home faces, and plumbing problems will soon be new.

Causes of broken pipes

There are many reasons why a pipe ruptures. Many factors can play a role, but sometimes most homeowners suffer from a few common causes. Pay attention to your plumbing system year-round, as pipe breaks rarely happen overnight. Here are some of the most common causes of burst pipes:

Corrosion.

First, corrosion can cause the pipeline to rupture. Corrosion occurs due to an imbalance in the pH value of the water. Rust can also cause a lot of corrosion. In either case, the corrosion will last for a long time until the pipeline fails. Rusted and out-of-balance pH values ​​can compromise the strength of the pipeline and lead to leaks or ruptures. Because well water generally contains a high concentration of iron, rusty pipes are more common in homes with well water.

Frozen.

During harsh and cold winters, pipeline freezing is a big problem. When the temperature drops below 32 degrees, the water in the pipe freezes. This can weaken the link in the pipe and cause it to break. When the temperature rises rapidly, such as when hot water is added, the ice or the pipes are destroyed. If you’ve ever had a long, cold winter, warm your home to avoid this problem.

Movements

In most cases, pipeline movements are accidental. Sometimes after winter, the pipe moves because the low temperature causes it to shrink. Changes can also occur when other parts of the pipeline are repaired or when the water pressure is too high and the pipeline shakes. If this movement increases the water pressure in a certain area, the hose will rupture.

Water pressure

The water pressure also increases because there is a blockage somewhere in the pipe. If the blockage is near the drain, it won’t cause much of a problem for the plumbing system. However, when an occlusion forms in the deep end of the pipe, water pressure is created around the occlusion. Water is leaking from the hose because it has nowhere to go. The pipeline ruptures when the pressure becomes too high to handle the metal.

Deal with a Burst Pipe and a Flooded Home

Homeowners have more control over broken pipes than they realize. Actual repairs should be done by aprofessional flood damage service, but procedures are in place to minimize water damage. These require little plumbing knowledge and are a quick way to keep important parts of your home from coming into contact with water. Implement these simple tips before the plumber arrives.

Put off your hand.

Stop watering first. When a burst occurs, no new water is Needed a flood damages San Diego in the piping system. Water already in the system is easier to remove than new water. Wait for the plumber to tell you that you can turn the water back on.

Call the plumber.

Then call a plumber. Do it as soon as possible to minimize the damage. You never know when the plumber will be home, so call as soon as possible to reduce the wait time. The plumber diagnoses the cause, discusses a solution, and fixes the problem. Preventive maintenance can also prevent a broken pipe, so you should schedule maintenance visits all year round to avoid this problem.

Clean water.

Eliminates water quickly to avoid excessive water damage. When a pipe does rupture some degree of water damage is needed to flood damage in San Diego, but the sooner the water is cleaned, the less likely it is to cause irreversible damage to your property. Quick cleaning ensures that mold and mildew do not grow. The longer the water stays, the more likely these materials are to grow, so clean and dry the area quickly.

Empty the faucet.

Drain the faucet to remove any residue from the system. Dehydration can reduce some of the pressure in the hose and make sure the hose is dry to prevent water leakage. Wash the toilet several times to drain the water from the toilet. Start with cold water, then move on to hot water. Make sure the boiler or water heater is off when doing this.

Add hot air.

Frozen pipes should be heated slowly to avoid further damage. To do this, increase the heating of the house. If there is still not enough heat, use a hairdryer to heat the hose. It heats up slowly, but at a rate sufficient to prevent the hose from breaking again. Dramatic temperature changes can rupture pipelines.

Leave the door open.

Leave the door open to circulate the hot air. Rooms with exposed ducts require more air circulation to dry the ducts and their surroundings. You want the hose to dry as quickly as possible, so always make sure there is air circulation. The hotter the air, the faster the water dries.

Repair the sleeve.

Repair housings and temporarily repair burst pipes. Slide the housing over the pipe to cover the hole or repair any damage. Because the water in the pipe accumulates in a short time, it can be used at home. However, since this repair is temporary, it does not take much time. Call a plumber as soon as possible to have the pipe repaired.

Rubber, wood chips, clips.

Rubber, wood, and clips are also ways that homeowners can fix broken pipes in a short time. Place the rubber on the burst area, cover it with a block of wood, and secure it together. This will keep the water in the pipe in no time. This method is not as long as the sleeve, so it is only used in emergencies. Immediately contact a Professional flood damage san Diego to have the pipe repaired.